Alright, fellow gamer! Keeping your amiibos pristine is almost as important as a perfect speedrun. Let’s get those white amiibos looking factory fresh again, because a dirty amiibo is a sad amiibo! I’ve scoured the digital realms for the best ways to clean them without causing any damage.

Keeping your white amiibos looking fresh out of the box is totally achievable, whether it’s just dust or a more stubborn yellowing. Here’s a detailed breakdown of how to get them sparkling:

### For Dust and Light Grime:

For everyday dust and light dirt, you’ll want to be gentle but thorough.

**What you’ll need:**
* Soft-bristle brush (like a new, unused paintbrush or makeup brush)
* Canned air (optional, but helpful for tight spots)
* Mild dish soap
* Lukewarm water
* Soft cloth (microfiber is excellent) or cotton swabs/Q-tips
* Paper towel (lightly dampened, if needed)

**Steps:**

1. **Dusting First:** Start by using a soft-bristle brush to gently sweep away any loose dust from the amiibo’s surface. Pay attention to crevices and textured areas where dust loves to hide. Canned air can be very effective for dislodging dust from hard-to-reach spots.
2. **Mild Soap and Water Solution:** If dusting isn’t enough, prepare a solution of lukewarm water with a tiny drop of mild dish soap. Avoid harsh chemicals or abrasive cleaners, as these can damage the paint or plastic.
3. **Gentle Cleaning:**
* Dampen a soft cloth or cotton swab with the soapy water solution, wringing out any excess moisture.
* Gently wipe down the amiibo, being careful around painted details. A soft toothbrush can be used for stubborn marks in crevices.
* Some users have found success by holding the amiibo upside down by the base and dunking only the figure part into water, avoiding the base where the NFC chip is located. While the base is generally considered waterproof, it’s always safer to minimize exposure to water.
4. **Rinsing (Lightly):** Wipe off any soap residue with a clean, damp cloth. Again, avoid saturating the figure.
5. **Air Dry:** Let your amiibo air dry thoroughly in a well-ventilated area, away from direct sunlight or heat, which can warp or fade the plastic and paint.

### For Yellowing White Plastic:

White plastics, especially older ones, can sometimes yellow due to exposure to UV light and aging. This is a common issue with plastic figures.

**What you’ll need:**
* Hydrogen peroxide (3% concentration is often recommended, but higher strengths exist, use with caution)
* A clear, airtight glass jar or container (large enough to submerge the amiibo)
* Sunlight (UV light activates the peroxide)
* Optional: OxyClean (some users combine with hydrogen peroxide)

**Steps:**

1. **Preparation:** Place the yellowed amiibo (or just the yellowed parts if you can safely isolate them, though amiibos are generally not designed for disassembly) into the glass jar.
2. **Submerge in Peroxide:** Fill the jar with hydrogen peroxide until the yellowed parts of the amiibo are completely submerged. If using OxyClean, mix it with the hydrogen peroxide in the jar.
3. **Sunlight Activation:** Seal the jar (some suggest making a small hole in the lid for vapor escape) and place it in direct sunlight. The UV light from the sun activates the hydrogen peroxide, which helps draw the yellowing out of the plastic.
4. **Wait and Monitor:** This process can take several hours to a few days. Check the amiibo periodically. You might see small bubbles forming, which indicates the process is working.
5. **Rinse and Dry:** Once the yellowing is removed to your satisfaction, take the amiibo out of the solution and give it a good clean with warm water and soap, then rinse thoroughly and air dry.

**Important Considerations for Yellowing:**
* **Paint and Stickers:** While many report success without paint damage, there’s always a slight risk, especially with older figures or delicate paint applications. Be cautious and consider spot-testing if possible.
* **Plastic Brittleness:** Leaving plastics in the solution for too long or using too strong a concentration of hydrogen peroxide *might* make the plastic brittle or pitted.
* **UV Protection:** To prevent future yellowing, consider displaying your white amiibos away from direct sunlight or in a UV-protective display case.

### For Sticky Residue or Mold:

* **Sticky Residue:** For sticky spots, a mild soap and water solution with a Q-tip or a cloth is often effective. Some suggest rubbing alcohol (70%) for sticky messes, but always spot-test first as alcohol can thin or damage paint. White vinegar can also be effective.
* **Mold:** A solution of equal parts white vinegar and water can be used to clean mold. Spray it on, let it sit for a few minutes, then scrub with a soft brush and rinse with clear water.

Remember, gentle